Acuitas Message Interface Protocol (AMI)
Introduction
The Acuitas Message Interface (AMI) is a simple ASCII based protocol to control a Acuitas Control System (ACS) over Ethernet, RS232 or RS422.
Download AMI Interface Protocol Description
See Attached PDF file.
Related Articles
Acuitas Fast Message Protocol (AFM)
Introduction The Acuitas Fast Message Protocol (AFM) is a binary protocol for optimized for high speed, hardware-in-the-loop application. The AFM protocol is available on Acuitas Control System (ACS) from Firmware Version >= 1.4.2.0. With the link ...
Acuitas Device Interface (ADI) Library
Introduction The Acuitas Device Interface (ADI) is a windows based library to communicate with all Acuitas supported devices/machines (ratetable, centrifuges, temperature chambers). With the link below you can download ADI (Acuitas Device Interface) ...
Acuitas Control System (ACS)
Introduction The Acuitas Control System (ACS) is a compact servo drive interface module to control different types of Acuitas test fixtures. Front View ACS (Gotthard Version) See attached datasheet for further specifications. SOME FEATURES Real-Time ...
Acuitas Motion Studio (AMS)
Introduction The Acuitas Motion Studio (AMS) is a windows application used to communicate with all Acuitas supported devices/machines (ratetable, centrifuges, temperature chambers). With the link below you can download AMS (Acuitas Motion Studio) ...
Assign a Static IP Address in Windows 7
Different Acuitas machines use a static IP address for communication with the outside. To use a computer with Windows 7 the computer must have a static IP address that is on the same subnet as the IP address of the machine. Same subnet means this if ...